Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC MC § 927.3?

Quick Answer

This section outlines the installation requirements for radiant panels on wood or steel framing. It specifies that heating panels must be secured properly and provides guidelines for mechanical fasteners and installation methods. Applies to contractors and building owners involved in the installation of heating systems.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

927.3 Installation on wood or steel framing.

MC § 927.3

Radiant panels installed on wood or steel framing shall conform to the following requirements: 1. Heating panels shall be installed parallel to framing members and secured to the surface of framing members or shall be mounted between framing members.

2.Mechanical fasteners shall penetrate only the unheated portions provided for this purpose. Panels shall not be fastened at any point closer than 1/4 inch (6.4 mm) to an element. Other methods of attachment of the panels shall be in accordance with the panel installation instructions.

3.Unless listed and labeled for field cutting, heating panels shall be installed as complete units.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 927.3?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters