Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC MC § 802.8?

Quick Answer

This section mandates the installation of insulation shields made of No. 26 gauge sheet metal for vents passing through insulated assemblies. The shields must ensure proper clearance from insulation materials as specified by the vent manufacturer's instructions. Applies to building owners responsible for vent installations in insulated areas.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

802.8 Insulation shield.

MC § 802.8

Where vents pass through insulated assemblies, an insulation shield constructed of not less than No. 26 gage sheet metal shall be installed to provide clearance between the vent and the insulation material. The clearance shall be not less than the clearance to combustibles specified by the vent manufacturer's instructions. Where vents pass through attic space, the shield shall terminate not less than 2 inches (50.8 mm) above the insulation materials and shall be secured in place to prevent displacement. Insulation shields provided as part of a listed vent system shall be installed in accordance with the manufacturer's instructions.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 802.8?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters