Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC MC § 308.4.2.1?

Quick Answer

This section outlines the clearance requirements for solid fuel-burning appliances, prohibiting the use of clearance reduction methods for appliances labeled for installation with clearances of 12 inches or less. For appliances requiring greater clearances, the statute mandates that reductions cannot bring the clearance below 12 inches. Applies to manufacturers and installers of solid fuel-burning appliances.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

308.4.2.1 Solid fuel-burning appliances.

MC § 308.4.2.1

The clearance reduction methods specified in Table 308.4.2 shall not be utilized to reduce the clearance required for solid fuel-burning appliances that are labeled for installation with clearances of 12 inches (304.8 mm) or less. Where appliances are labeled for installation with clearances of greater than 12 inches (304.8 mm), the clearance reduction methods of Table 308.4.2 shall not reduce the clearance to less than 12 inches (304.8 mm).

Common Questions

Our team

Meet the people you will work with

Free case review

Talk to an attorney before you act on NYC code.

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters