Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC MC § 1210.6.6.3?

Quick Answer

This section outlines the requirements for stab-type insert fittings, specifying that joint surfaces must be clean and dry, pipe ends should be chamfered, and fittings must meet ASTM F 1924 standards. Applies to contractors and installers of plumbing systems.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1210.6.6.3 Stab-type insert fittings.

MC § 1210.6.6.3

Joint surfaces shall be clean and free from moisture. Pipe ends shall be chamfered and inserted into the fittings to full depth. Fittings shall be manufactured in accordance with ASTM F 1924.

Common Questions

Our team

Meet the people you will work with

Free case review

Talk to an attorney before you act on NYC code.

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters