Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC MC § 1210.4?

Quick Answer

This section establishes standards for piping and tubing materials used in ground-source heat pump ground-loop systems, referencing specific ASTM and CSA standards for various materials. Applies to building owners involved in the installation of ground-source heat pump systems.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1210.4 Piping and tubing materials standards.

MC § 1210.4

Ground-source heat pump ground-loop pipe and tubing shall conform to the standards listed in Table 1210.4. Table 1210.4Ground-Source Loop Pipe MaterialStandard (see Chapter 15)MaterialStandard (see Chapter 15)Chlorinated polyvinyl chloride (CPVC)ASTM D 2846; ASTM F 441; ASTM F 442Cross-linked polyethylene (PEX)ASTM F 876; ASTM F 877; CSA B137.5Polyethylene/aluminum/polyethylene (PE-AL-PE) pressure pipeASTM F 1282; CSA B137.9High-density polyethylene (HDPE)ASTM D 2737; ASTM D 3035; ASTM F 714; AWWA C901; CSA B137.1; CSA C448; NSF 358-1Polypropylene (PP-R)ASTM F 2389; CSA B137.11Polyvinyl chloride (PVC)ASTM D 1785; ASTM D 2241Raised temperature polyethylene (PE-RT)ASTM F 2623

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1210.4?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters