Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC MC § 1203.3.4?

Quick Answer

This section outlines the requirements for solvent-cemented joints in piping systems, specifying that joint surfaces must be clean and free of moisture. It mandates the use of compatible primers and solvent cement that meets certain ASTM standards. Applies to building owners involved in plumbing installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1203.3.4 Solvent-cemented joints.

MC § 1203.3.4

Joint surfaces shall be clean and free of moisture. A primer, compatible with both the piping material and the cement shall be applied to pipe-joint surfaces, in accordance with the manufacturer's requirements. Joints shall be made while the cement is wet. Solvent cement conforming to the following standards shall be applied to all joint surfaces: 1. ASTM D 2235 for ABS joints.

2.ASTM F 493 for CPVC joints.

3.ASTM D 2564 for PVC joints.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1203.3.4?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters