Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC MC § 1107.5.5?

Quick Answer

This section outlines the requirements for making soldered joints, including the cleaning of joint surfaces, application of an appropriate flux, and the use of specific solder types as per ASTM standards. Applies to building owners and operators involved in plumbing or mechanical work.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1107.5.5 Soldered joints.

MC § 1107.5.5

Soldered joints shall be made as follows: soldered joint surfaces shall be cleaned, a flux conforming to ASTM B 813 shall be applied, and the joint shall be soldered with a solder conforming to ASTM B 32.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1107.5.5?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters