Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC FGC § 503.12.2.1?

Quick Answer

This section mandates the installation of a draft hood when not supplied by the appliance manufacturer. The draft hood must be of a listed or approved type and match the size of the appliance flue collar unless otherwise specified. Applies to building owners installing appliances requiring draft hoods.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

503.12.2.1 Draft hood required.

FGC § 503.12.2.1

If a draft hood is not supplied by the appliance manufacturer where one is required, a draft hood shall be installed, shall be of a listed or approved type and, in the absence of other instructions, shall be of the same size as the appliance flue collar. Where a draft hood is required with a conversion burner, it shall be of a listed or approved type.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 503.12.2.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters