Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC FGC § 503.10.3.3?

Quick Answer

This section outlines the requirements for sizing vent connectors when multiple appliances are connected to a common vent or chimney. It specifies that each connector must comply with Section 504 or approved engineering methods, or have an effective area at least equal to the draft hood outlet of the connected appliance. Applies to building owners with multiple connected appliances.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

503.10.3.3 Multiple appliances.

FGC § 503.10.3.3

Where two or more appliances are connected to a common vent or chimney, each vent connector shall be sized in accordance with Section 504 or other approved engineering methods. As an alternative method applicable only when all of the appliances are draft hood equipped, each vent connector shall have an effective area not less than the area of the draft hood outlet of the appliance to which it is connected.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 503.10.3.3?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters