Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC FGC § 403.12.6?

Quick Answer

This section permits the use of standard facings under specific conditions. It specifies that when bolting 150 pound pressure-rated steel flanges to Class 125 cast-iron flanges, the raised face on the steel flange must be removed. Applies to building owners involved in flange installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

403.12.6 Flange facings.

FGC § 403.12.6

Standard facings shall be permitted for use under this code. Where 150 pound (1034 kPa) pressure-rated steel flanges are bolted to Class 125 cast-iron flanges, the raised face on the steel flange shall be removed.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 403.12.6?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters