Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC AC § 24-125?

Quick Answer

This section outlines the standards required for granting work permits related to equipment installation or alteration. The commissioner must be satisfied with various certifications, including compliance with emission standards and equipment accessibility. Applies to applicants seeking work permits for equipment regulated under this code.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

§ 24-125 Standards for granting work permits.

AC § 24-125

(a)Except as provided in section 24-126 of this code, no work permit shall be granted unless the applicant certifies to the satisfaction of the commissioner that: (1) The equipment is designed and will be installed or altered to operate in accordance with the provisions of this code and with any applicable rules the commissioner may promulgate pursuant to this code; (2) The equipment has been certified by a registered design professional to meet the current applicable federal, state and city emission standards; (3) Equipment that will have a stack, chimney, or breaching will be provided with: (i) Sampling ports of a size, number and location as the commissioner may require, and (ii) Safe access to each port, and (iii) Such other sampling and testing facilities as the commissioner may require; (4) Refuse burning equipment operated by the department contains control apparatus which meets any performance standards that may be prescribed by the commissioner; (5) When required by the commissioner, fuel burning equipment that will use residual fuel oil will be installed with an air contaminant detector together with either a combustion shutoff or, when acceptable to the commissioner, an air contaminant recorder, except that no combustion shutoff shall be required on fuel burning equipment used to generate steam for off-premises sale or electricity; and (6) All parts of the equipment can be readily cleaned and repaired.

(b)In order to reduce the emission of air contaminants and to insure optimum combustion in fuel burning equipment and refuse burning equipment, such equipment shall be shown to the satisfaction of the commissioner to: (1) Be of a proper size to handle the planned load, be located in a proper place and incorporate appropriate apparatus; and (2) Burn fuel or other material determined by the commissioner to be appropriate for the specific size and type of equipment.

(c)The commissioner may require that any equipment or apparatus that requires a work permit, or any class or category of such equipment or apparatus, be included on a list of accepted equipment or apparatus maintained by the department. No acceptance for listing of equipment or apparatus shall be granted unless the applicant certifies to the satisfaction of the commissioner that such equipment or apparatus complies with all applicable provisions of this code and such other applicable rules as the commissioner may promulgate pursuant to this code. (Am. L.L. 2015/038, 5/6/2015, eff. 5/6/2016)

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 24-125?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters