Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC PC § 906.2?

Quick Answer

This section specifies the minimum diameter requirements for various types of vents, including branch and relief vents, in relation to the drains they serve. It outlines that vent pipes must not be less than 1 1/4 inches in diameter and provides guidelines for sizing based on drainage fixture units. Applies to building owners managing plumbing systems.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

906.2 Vents other than stack vents or vent stacks.

PC § 906.2

The diameter of individual vents, branch vents, circuit vents and relief vents shall be at least one-half the required diameter of the drain served. The required size of the drain shall be determined in accordance with Table 710.1(2). Vent pipes shall not be less than 1 1/4 inches (32 mm) in diameter. Vents shall be sized in accordance with Table 906.1 utilizing the drainage fixture units and the corresponding developed length. Relief vents for soil and waste stacks in buildings having more than 10 branch intervals shall be sized in accordance with Section 908.2.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 906.2?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters