Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC PC § 803.3.4.2.1?

Quick Answer

This section outlines the requirements for mechanical joints in glass-to-glass connections, specifying the use of a bolted compression-type coupling made from 300 series stainless steel or caulked joints as per Section 803.3.4.2.2. Applies to building owners involved in construction or renovation projects.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

803.3.4.2.1 Mechanical joints.

PC § 803.3.4.2.1

Glass-to-glass connections shall be made with a bolted compression- type, 300 series stainless steel coupling with contoured acid-resistant elastomeric compression ring and a fluorocarbon polymer inner seal ring; or with caulked joints in accordance with Section 803.3.4.2.2.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 803.3.4.2.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters