Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC PC § 705.19?

Quick Answer

This section specifies the material and weight requirements for soldering bushings, mandating that they be made of red brass and conform to the outlined specifications in Table 705.19. Applies to manufacturers and installers of plumbing components.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

705.19 Soldering bushings.

PC § 705.19

Soldering bushings shall be of red brass and shall be in accordance with Table 705.19. Table 705.19Soldering Bushing Specifications Pipe Sizes(inches)Minimum WeightEach1 1/46 ounces 1 1/28 ounces 2 14 ounces 2 1/21 pound 6 ounces 3 2 pounds 4 3 pounds 8 ounces For SI: 1 inch = 25.4 mm, 1 ounce = 28.35 g, 1 pound = 0.454 kg.

Common Questions

Our team

Meet the people you will work with

Free case review

Talk to an attorney before you act on NYC code.

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters