Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC PC § 705.16.4?

Quick Answer

This section outlines the requirements for making joints between different types of plastic pipe and other piping materials. It specifies that approved adapter fittings must be used for these joints, and that joints between plastic pipe and cast-iron hub pipe should be made with either a caulked joint or a mechanical compression joint. Applies to building owners and contractors involved in plumbing installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

705.16.4 Plastic pipe or tubing to other piping material.

PC § 705.16.4

Joints between different types of plastic pipe or between plastic pipe and other piping material shall be made with an approved adapter fitting. Joints between plastic pipe and cast-iron hub pipe shall be made by a caulked joint or a mechanical compression joint.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 705.16.4?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters