Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC FC § 904.6.2.3.1?

Quick Answer

This section outlines the testing procedures for hoses used in high-pressure and low-pressure systems, specifying the minimum pressure requirements of 2,500 psi for high-pressure systems and 900 psi for low-pressure systems. Applies to operators of systems requiring hose testing.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

904.6.2.3.1 Test procedure.

FC § 904.6.2.3.1

Hoses shall be tested at not less than 2,500 pounds per square inch (psi) (17 238 kPa) for high-pressure systems and at not less than 900 psi (6206 kPa) for low-pressure systems.

Common Questions

Our team

Meet the people you will work with

Free case review

Talk to an attorney before you act on NYC code.

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters