Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 803.10?

Quick Answer

This section outlines the testing requirements for site-fabricated stretch systems used as interior wall or ceiling finishes. These systems must comply with the specified requirements and be tested according to relevant ASTM standards. Applies to building owners utilizing such materials in interior constructions.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

803.10 Site-fabricated stretch systems.

BC § 803.10

Where used as interior wall or interior ceiling finish materials, site-fabricated stretch systems containing all three components described in the definition in Chapter 2 of this code shall be tested in the manner intended for use, and shall comply with the requirements of Section 803.1.1 or 803.1.2 of this code. If the materials are tested in accordance with ASTM E 84 or UL 723, specimen preparation and mounting shall be in accordance with ASTM E 2573.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 803.10?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters