Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 803.1.2.1?

Quick Answer

This section outlines the acceptance criteria for interior finishes in relation to NFPA 286 testing. It specifies that flames must not spread to the ceiling or outer extremities of the sample, and sets limits on peak heat release and total smoke released during the test. Applies to building owners ensuring compliance with fire safety standards.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

803.1.2.1 Acceptance criteria for NFPA 286.

BC § 803.1.2.1

The interior finish shall comply with the following: 1. During the 40 kW exposure, flames shall not spread to the ceiling.

2.The flame shall not spread to the outer extremity of the sample on any wall or ceiling.

3.Flashover, as defined in NFPA 286, shall not occur.

4.The peak heat release rate throughout the test shall not exceed 800 kW.

5.The total smoke released throughout the test shall not exceed 10,764 square feet (1000 m 2 ).

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 803.1.2.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters