Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 722.2.2.1.2?

Quick Answer

This section outlines the method for determining the thickness of slabs with sloping soffits, specifying that the measurement should be taken at a distance of 2t or 6 inches from the point of minimum thickness. Applies to building owners involved in construction or renovation projects.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

722.2.2.1.2 Slabs with sloping soffits.

BC § 722.2.2.1.2

The thickness of slabs with sloping soffits (see Figure 722.2.2.1.2) shall be determined at a distance 2t or 6 inches (152.4 mm), whichever is less, from the point of minimum thickness, where t is the minimum thickness. For SI: 1 inch = 25.4 mm. Figure 722.2.2.1.2Determination of Slab Thickness For Sloping Soffits

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 722.2.2.1.2?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters