Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC PC § 605.24.1?

Quick Answer

This section outlines the requirements for joining copper or copper-alloy tubing to galvanized steel pipe. It specifies the use of brass fittings or dielectric fittings conforming to ASSE 1079, and mandates that the copper tubing be soldered to the fitting. Applies to plumbing professionals and contractors involved in such installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

605.24.1 Copper or copper-alloy tubing to galvanized steel pipe.

PC § 605.24.1

Joints between copper or copper-alloy tubing and galvanized steel pipe shall be made with a brass fitting or dielectric fitting or a dielectric union conforming to ASSE 1079. The copper tubing shall be soldered to the fitting in an approved manner, and the fitting shall be screwed to the threaded pipe.

Common Questions

Our team

Meet the people you will work with

Free case review

Talk to an attorney before you act on NYC code.

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters