Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC PC § 605.14.5?

Quick Answer

This section outlines the requirements for press-connect joints, specifying that they must adhere to standards listed in Table 605.5 and be installed per manufacturer instructions. Proper preparation of tube ends and the use of certified pressing tools are mandated. Applies to building owners utilizing press-connect joints in plumbing systems.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

605.14.5 Press-connect joints.

PC § 605.14.5

Press-connect joints shall conform to one of the standards listed in Table 605.5, and shall be installed in accordance with the manufacturer's instructions. Cut tube ends shall be reamed to the full inside diameter of the tube end. Joint surfaces shall be cleaned. The tube shall be fully inserted into the press-connect fitting. Press-connect joints shall be pressed with a tool certified by the manufacturer.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 605.14.5?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters