Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC PC § 425.3.1?

Quick Answer

This section mandates that flush tanks must have an antisiphon fill valve that meets ASSE 1002 or CSA B125.3 standards. Additionally, the fill valve backflow preventer must be positioned at least 1 inch above the overflow pipe's full opening. Applies to building owners responsible for plumbing installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

425.3.1 Fill valves.

PC § 425.3.1

Flush tanks shall be equipped with an antisiphon fill valve conforming to ASSE 1002 or CSA B125.3. The fill valve backflow preventer shall be located not less than 1 inch (25 mm) above the full opening of the overflow pipe.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 425.3.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters