1403.1.1 Absorption area.
PC § 1403.1.1
The total absorption area required shall be computed from the estimated daily gray water discharge and the design-loading rate based on the percolation rate for the site. The required absorption area equals the estimated gray water discharge divided by the design-loading rate from Table 1403.1.1. Table 1403.1.1Design Loading Rate Percolation Rate(minutes per inch)Design Loading Factor(gallons per square foot per day)Percolation Rate(minutes per inch)Design Loading Factor(gallons per square foot per day)< 1Not suitable1 - 51.206 - 71.008 - 100.9011 - 150.8016 - 200.7021 - 300.6031 - 450.5046 - 600.4561 - 1200.20> 120Not Suitable For SI: 1 minute per inch = min/25.4 mm, 1 gallon per square foot = 40.7 L/m2.













