Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC FC § 5704.2.7.5.5?

Quick Answer

This section outlines the requirements for the design and installation of metallic fill pipes for top-loaded tanks to minimize static electricity and excessive vibration. The statute specifies that the fill pipe should terminate within 6 inches of the tank bottom. Applies to property operators managing top-loaded tank installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

5704.2.7.5.5 Fill pipes and discharge lines.

FC § 5704.2.7.5.5

For top-loaded tanks, a metallic fill pipe shall be designed and installed to minimize the generation of static electricity by terminating the pipe within 6 inches (152 mm) of the bottom of the tank, and it shall be installed in a manner which avoids excessive vibration.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 5704.2.7.5.5?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters