Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC FC § 5703.6.2.1?

Quick Answer

This section outlines the acceptable materials for underground and aboveground piping systems. Low-melting-point materials like aluminum, copper, and brass may be used underground if they comply with applicable standards. Aboveground components must be made of Schedule 40 steel or higher. Applies to building owners involved in piping system installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

5703.6.2.1 Special materials.

FC § 5703.6.2.1

Low-melting-point materials, such as aluminum, copper or brass, that soften on fire exposure, such as nonmetallic materials, and nonductile material, such as cast iron, shall be acceptable for use underground only in accordance with the applicable standard listed in FC Table 5703.6.2. Aboveground piping system components shall be constructed of Schedule 40 steel or a higher schedule steel.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 5703.6.2.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters