Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 415.11.1.8?

Quick Answer

This section mandates that electrical equipment and devices in fabrication areas adhere to the New York City Electrical Code. It specifies that hazardous location requirements may be waived under certain air change conditions. Applies to building owners operating fabrication facilities.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

415.11.1.8 Electrical.

BC § 415.11.1.8

Electrical equipment and devices within the fabrication area shall comply with the New York City Electrical Code. The requirements for hazardous locations need not be applied where the average air change is at least four times that set forth in Section 415.11.1.6 and where the number of air changes at any location is not less than three times that required by Section 415.11.1.6. The use of recirculated air shall be permitted.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 415.11.1.8?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters