Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 3314.15.2?

Quick Answer

This section specifies that hangers or stirrups must be made of steel or wrought iron and outlines their placement relative to the platform and hoist mechanism. It allows for alternative spacing if specified by the manufacturer and indicated on design drawings by a registered design professional. Applies to building owners installing hoisting equipment.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

3314.15.2 Hangers or stirrups.

BC § 3314.15.2

Hangers or stirrups shall be of steel or wrought iron. Each such hanger shall be formed to properly fit the platform and the hoist mechanism. The hanger or stirrup shall be placed at least 6 inches (152 mm) but not more than 18 inches (457 mm) from the end of the platform. Exception: Alternative spacing from the end of the platform may be utilized where the manufacturer so specifies and such alternative spacing is indicated on design drawings developed by a registered design professional.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 3314.15.2?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters