Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 3305.3.4.2?

Quick Answer

This section outlines the requirements for vertical shores used in multi-stage shores, including alignment with lower tiers and the need for adequate transfer members for load distribution. It mandates that vertical shores must be erected to prevent tilting and ensures that bearing surfaces are properly fitted. Applies to building owners involved in construction and shoring operations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

3305.3.4.2 Vertical shores.

BC § 3305.3.4.2

Vertical shores incorporated in multi-stage shores shall be set plumb and in alignment with lower tiers so that loads from upper tiers are transferred directly to the lower tiers, or adequate transfer members shall be provided. Provision shall be made to transfer the lateral loads to the ground or to completed construction of adequate strength. Vertical shores shall be so erected that they cannot tilt, and shall have firm bearing. Inclined shores and the bearing ends of all shores shall be braced against slipping or sliding. The bearing surfaces shall be cut square and have a tight fit at splices.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 3305.3.4.2?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters