Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 2510.7?

Quick Answer

This section outlines the requirements for preparing masonry and concrete surfaces to ensure proper bonding. It specifies that surfaces must be clean, damp, and rough, and details the use of bonding agents or a dash bond coat if necessary. Applies to building owners involved in masonry and concrete work.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

2510.7 Preparation of masonry and concrete.

BC § 2510.7

Surfaces shall be clean, free from efflorescence, sufficiently damp and rough for proper bond. If the surface is insufficiently rough, approved bonding agents or a portland cement dash bond coat mixed in proportions of not more than two parts volume of sand to one part volume of portland cement or plastic cement shall be applied. The dash bond coat shall be left undisturbed and shall be moist cured not less than 24 hours.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 2510.7?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters