Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 2410.3?

Quick Answer

This section specifies the design requirements for markings, including minimum dimensions for circular, elliptical, and polygonal shapes. The statute outlines that markings must meet specific height and width criteria to ensure visibility. Applies to building owners responsible for compliance with marking standards.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

2410.3 Design.

BC § 2410.3

The marking design shall be at least 4 inches (102 mm) in diameter if circular or 4 inches (102 mm) in its least dimension if elliptical or polygonal, or shall be at least 12 inches (305 mm) in horizontal dimension if the marking is less than 4 inches (102 mm) in its least dimension. In no event shall the vertical dimension of any marking including lettering be less than 1 1/2 inches (38 mm) in height.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 2410.3?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters