Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 2308.7.6?

Quick Answer

This section outlines the requirements for framing around openings, specifying that trimmer and header rafters must be doubled or made of equivalent cross section when the header span exceeds 4 feet. Additionally, it mandates support for header rafters longer than 6 feet using framing anchors or rafter hangers unless they bear on a structural element. Applies to building owners involved in construction or renovations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

2308.7.6 Framing around openings.

BC § 2308.7.6

Trimmer and header rafters shall be doubled, or of lumber of equivalent cross section, where the span of the header exceeds 4 feet (1219 mm). The ends of header rafters that are more than 6 feet (1829 mm) in length shall be supported by framing anchors or rafter hangers unless bearing on a beam, partition or wall.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 2308.7.6?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters