Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 2308.7.4?

Quick Answer

This section establishes limitations on notches and holes in rafters and ceiling joists to ensure structural integrity. It specifies the maximum allowable dimensions for notches and the placement of holes, aiming to prevent weakening of these structural components. Applies to building owners involved in construction or renovation projects.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

2308.7.4 Notches and holes.

BC § 2308.7.4

Notching at the ends of rafters or ceiling joists shall not exceed one-fourth the depth. Notches in the top or bottom of the rafter or ceiling joist shall not exceed one-sixth the depth and shall not be located in the middle one-third of the span, except that a notch not more than one-third of the depth is permitted in the top of the rafter or ceiling joist not further from the face of the support than the depth of the member. Holes bored in rafters or ceiling joists shall not be within 2 inches (51 mm) of the top and bottom and their diameter shall not exceed one-third the depth of the member.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 2308.7.4?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters