Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 2308.5.3.1?

Quick Answer

This section mandates that studs must have full bearing on a plate or sill, which must be at least 2 inches in thickness and match the width of the wall studs. Applies to building owners involved in construction or renovation projects.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

2308.5.3.1 Bottom plate or sill.

BC § 2308.5.3.1

Studs shall have full bearing on a plate or sill. Plates or sills shall be not less than 2 inches (51 mm) nominal in thickness and have a width not less than the width of the wall studs.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 2308.5.3.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters