Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 2308.4.2.4?

Quick Answer

This section outlines the limitations on notches and holes in joists, specifying maximum dimensions and locations to ensure structural integrity. The statute prohibits notches exceeding one-fourth or one-sixth of the joist depth and regulates the placement of holes. Applies to building owners involved in structural modifications or inspections.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

2308.4.2.4 Notches and holes.

BC § 2308.4.2.4

Notches on the ends of joists shall not exceed one-fourth the joist depth. Notches in the top or bottom of joists shall not exceed one-sixth the depth, shall not be longer than one-third the depth and shall not be located in the middle third of the span. Holes bored in joists shall not be within 2 inches (51 mm) of the top or bottom of the joist and the diameter of any such hole shall not exceed one-third the depth of the joist. Holes bored in the middle third of the span shall be located at the center of the joist depth. Clear distance between holes & notches shall be a minimum of 2 inches (51 mm). See Figure 2308.4.2.4. Figure 2308.4.2.4Joist Boring and Notching LimitsNot to Scale

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 2308.4.2.4?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters