Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 2304.9.1?

Quick Answer

This section outlines the requirements for lumber decking, specifying that each piece must be square-end trimmed and detailing the acceptable tolerances for squareness. It also mandates the installation orientation for tongue-and-groove decking on sloped roofs. Applies to building owners involved in construction or renovation projects.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

2304.9.1 General.

BC § 2304.9.1

Each piece of lumber decking shall be square-end trimmed. When random lengths are furnished, each piece shall be square-end trimmed across the face so that at least 90 percent of the pieces are within 0.5 degrees (0.00873 rad) of square. The ends of the pieces shall be permitted to be beveled up to 2 degrees (0.0349 rad) from the vertical with the exposed face of the piece slightly longer than the opposite face of the piece. Tongue-and-groove decking shall be installed with the tongues up on sloped or pitched roofs with pattern faces down.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 2304.9.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters