Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 2303.2.3?

Quick Answer

This section outlines the testing requirements for wood products manufactured by methods other than a pressure process. It specifies that all sides of the wood product must be tested according to the standards set in Section 2303.2, while wood structural panels may only be tested on their front and back faces. Applies to manufacturers of wood products.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

2303.2.3 Testing.

BC § 2303.2.3

For wood products produced by other means during manufacture, other than a pressure process, all sides of the wood product shall be tested in accordance with and produce the results required in Section 2303.2. Wood structural panels shall be permitted to be tested on only the front and back faces.

Common Questions

Our team

Meet the people you will work with

Free case review

Talk to an attorney before you act on NYC code.

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters