Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 1911.10.2?

Quick Answer

This section establishes criteria for test panels based on the size of aggregate used in construction. It specifies minimum dimensions for panels depending on the maximum aggregate size and outlines conditions for curing the panels. Applies to building owners involved in construction projects requiring test panels.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1911.10.2 Panel criteria.

BC § 1911.10.2

When the maximum-size aggregate is larger than 3/8 inch (9.5 mm), the test panels shall have minimum dimensions of 18 inches by 18 inches (457 mm by 457 mm). When the maximum-size aggregate is 3/8 inch (9.5 mm) or smaller, the test panels shall have minimum dimensions of 12 inches by 12 inches (305 mm by 305 mm). Panels shall be shot in the same position as the work, during the course of the work and by the nozzlemen doing the work. The conditions under which the panels are cured shall be the same as the work.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1911.10.2?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters