Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 1814.4.1?

Quick Answer

This section outlines the procedures for verifying the allowable axial compression load of helical piles through load tests. It specifies that tests must comply with Section 1810.4 and allows for the use of the Quick Load Test Loading Procedure. Applies to building owners utilizing helical piles in construction.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1814.4.1 Compression load test procedures.

BC § 1814.4.1

The allowable axial compression load of a helical pile shall be verified by load tests in accordance with the requirements of Section 1810.4, except that ASTM D 1143 may be conducted using the Quick Load Test Loading Procedure. Following each compression load test, the helical pile being tested shall be removed by unscrewing and inspected for any deformations to the helices to verify the structural integrity of the shaft and its connections.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1814.4.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters