Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 1507.9.7?

Quick Answer

This section specifies the requirements for fasteners used in the installation of wood shakes, mandating that they be corrosion resistant and penetrate at least 3/4 inch into the sheathing. It also requires that each shake be secured with a minimum of two fasteners. Applies to building owners involved in construction or renovation projects.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1507.9.7 Attachment.

BC § 1507.9.7

Fasteners for wood shakes shall be corrosion resistant with a minimum penetration of 3/4 inch (19.1 mm) into the sheathing. For sheathing less than 1/2 inch (12.7 mm) in thickness, the fasteners shall extend through the sheathing. Each shake shall be attached with a minimum of two fasteners.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1507.9.7?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters