Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 1503.2.1?

Quick Answer

This section outlines the requirements for the installation of flashing at various locations, including wall and roof intersections, gutters, changes in roof slope or direction, and around roof openings. It specifies that metal flashing must be corrosion resistant and of a minimum thickness. Applies to building owners responsible for roofing installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1503.2.1 Locations.

BC § 1503.2.1

Flashing shall be installed at wall and roof intersections, at gutters, wherever there is a change in roof slope or direction and around roof openings. Where flashing is of metal, the metal shall be corrosion resistant with a thickness of not less than 0.019 inch (0.483 mm) (No. 26 galvanized sheet).

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1503.2.1?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters