Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 1405.12.4?

Quick Answer

This section outlines the requirements for the installation of thin exterior structural glass veneer at sidewalk level. Each section must rest in approved metal molding and be positioned at least 1/4 inch above the highest point of the sidewalk, with the space caulked to ensure water tightness. Applies to building owners involved in facade installations.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1405.12.4 Installation at sidewalk level.

BC § 1405.12.4

Where thin exterior structural glass veneer extends to a sidewalk surface, each section shall rest in an approved metal molding, and be set at least 1/4 inch (6.4 mm) above the highest point of the sidewalk. The space between the molding and the sidewalk shall be thoroughly caulked and made water tight.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1405.12.4?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters