Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC BC § 1405.11?

Quick Answer

This section outlines the requirements for metal veneers used in construction, specifying that they must be made from approved corrosion-resistant materials or treated to prevent corrosion. The thickness of the metal sheet must be no less than 0.0149 inches and properly mounted. Applies to building owners using metal veneers in construction.

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

1405.11 Metal veneers.

BC § 1405.11

Veneers of metal shall be fabricated from approved corrosion-resistant materials or shall be protected front and back with porcelain enamel, or otherwise be treated to render the metal resistant to corrosion. Such veneers shall be not less than 0.0149-inch (0.378 mm) nominal thickness sheet steel mounted on wood or metal furring strips or approved sheathing on light-frame construction.

Common Questions

Our team

Meet the people you will work with

Free case review

Have a matter that touches § 1405.11?

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters