1014.3.2 Type II.
BC § 1014.3.2
Handrails with a perimeter greater than 6 1/4 inches (158.75 mm) shall provide a graspable finger recess area on both sides of the profile. The finger recess shall begin within a distance of 3/4 inch (19 mm) measured vertically from the tallest portion of the profile and achieve a depth of not less than 5/16 inch (7.9 mm) within 7/8 inch (22 mm) below the widest portion of the profile. This required depth shall continue for not less than 3/8 inch (9.6 mm) to a level that is not less than 1 3/4 inches (44.5 mm) below the tallest portion of the profile. The width of the handrail above the recess shall be not less than 1 1/4 inches (31.75 mm) to not greater than 2 3/4 inches (69.9 mm). Edges shall have a minimum radius of 0.01 inch (0.25 mm).













