1012.10 Edge protection.
BC § 1012.10
Edge protection complying with Section 1012.10.1 shall be provided on each side of ramp runs and at each side of ramp landings not adjoining another ramp run or stairway. Exceptions: 1. Edge protection is not required on ramps that are not required to have handrails, provided they have flared sides that comply with the ICC A117.1 curb ramp provisions.
2.Edge protection is not required on the sides of ramp landings having a vertical dropoff of not more than 1/2 inch (12.7 mm) within 10 inches (254 mm) horizontally of the required landing area.
3.Edge protection is not required where the floor or ground surface of the ramp run or landing extends 12 inches (304.8 mm) minimum beyond the inside face of handrail complying with Section 1014.













