Brooklyn since 2014All five boroughsSame-day response during business hours

What is NYC RCNY § 5-02?

Quick Answer

The following provisions apply to all applicants and permittees or licensees, excepting only when otherwise indicated: (a) Each applicant who is an active customer shall produce each vehicle for which a permit or license is requested for inspection and/or measurement and/or weighing at a time and place to be named by

General informational summary. Not legal advice for your situation. Consult an attorney before acting on any specific matter.

Michael Nacmias - Founding PartnerMichael Sargo - Partner
From the team atNacmias Law Firm, PLLCBrooklyn-based attorneys representingproperty owners across all five boroughsMeet the team →

§ 5-02 Rules of General Applicability.

RCNY § 5-02

The following provisions apply to all applicants and permittees or licensees, excepting only when otherwise indicated: (a) Each applicant who is an active customer shall produce each vehicle for which a permit or license is requested for inspection and/or measurement and/or weighing at a time and place to be named by the Commissioner's representative. Failure of an applicant to produce any vehicle at the time and place fixed by the Commissioner's representative shall be deemed an abandonment of the application for permit or license for the vehicle or vehicles not produced at the time fixed, unless and until the vehicle or vehicles are produced at such subsequent time as the Commissioner's representative shall fix and no application will be advanced by the Department for issuance of permit or license until the vehicle or vehicles have been produced for the above purposes at the time and place fixed by the Commissioner's representative.

(b)After issuance of a permit or license, each permittee or licensee who is an active customer shall produce each vehicle for re-inspection and/or re-measurement and/or re-weighing at a place and time designated by the Commissioner's representative. Any vehicle that is not produced by such permittee or licensee for re-inspection and/or re-measurement and/or re-weighing shall not be allowed to dispose of materials at any facility.

(c)When upon re-inspection and/or re-measurement and/or re-weighing a vehicle that is owned by a permittee or licensee who is an active customer is found then by the Commissioner's representative not to be in compliance with these Rules and Regulations the permit or license for such vehicles may be suspended until remedial action by the permittee or licensee places the vehicle again in full compliance with these Rules and Regulations, or the Commissioner's representative may fix a time within which the permittee or licensee may place the vehicle in compliance with these Regulations. In the latter case, the permittee or licensee shall produce the vehicle for re-inspection and/or re-measurement and/or re-weighing at the expiration of the time allowed at the place designated by the Commissioner's representative. If the permit or license was suspended pending compliance, the permittee or licensee shall notify the Commissioner's representative when he deems the vehicle in compliance with these Rules and Regulations and thereupon the permittee or licensee shall produce the vehicle at the time and place designated by the Commissioner's representative for re-inspection and/or re-measurement and/or re-weighing. During any such time that a permit or license for a vehicle is suspended, such vehicle shall not be allowed to dispose of material at any facility.

(d)All vehicle wheels shall be equipped with pneumatic tires, but this provision shall not apply to Class 3 vehicles.

(e)Each vehicle of all classes shall have the name and business address of the permittee or licensee lettered legibly in letters and figures not less than eight inches in height on each side of the vehicle body or upon each door of the vehicle cab at all times.

(f)Each vehicle (except Class 3) shall have painted upon each side of the vehicle body well forward, in letters and figures not less than two inches in height, the following: UNL VEH WT DS REG CAP POUNDS CU YDS (g) Each Class 3 vehicle shall be supplied at all times with a neatly lettered sign not less than 18 inches square bearing these legends arranged in three lines as follows: UNL VEH WT NOT TO EXCEED TOTAL CU YDS POUNDS CONTAINERS which sign shall be displayed as required by 16 RCNY § 5-07(q).

(h)All legends painted on the sides of the vehicle body shall be so placed to be visible at all times and not obscured by lowered hinged sideboards, or tarpaulin covers secured in place down the sides.

(i)Each operator of a vehicle shall have in his possession at all times the Department of Consumer Affairs permit or license document, State Motor Vehicle Registration Certificate for the vehicle, and chauffeur's license.

Common Questions

Our team

Meet the people you will work with

Free case review

Talk to an attorney before you act on NYC code.

Free 15-minute case review with the attorney handling your matter. Same-day response during business hours across all five boroughs — OATH hearings, Housing Court, and real estate closings.

Or email us

[email protected]

An attorney reads every message.

  • Same-day response

    During business hours

  • Direct attorney access

    Same lawyer from intake to close

  • Flat-fee pricing

    On most OATH and closing matters